Tap to unmute

4'x4' CNC Plasma: First Cuts (Parts List & Dimensions in Description)

Chia sẻ
Nhúng
  • Xuất bản 01 Th06, 2018
  • HEADPHONE WARNING: Compressor kicks on multiple times during the cut, its loud.
    PARTS LIST:
    Ebay
    Goplus 12U Wall Mount Server Enclosure $80
    PriceCNC THC $340 www.pricecnc.com/
    Three R55 25mm x 75mm Drag Chain $58
    (8) Ebay M18 8mm DC 5V NPN NO LJ18A3-8-Z/BX-5V 300mA Inductive Sensor Switch $31
    4 Pin Aviation Plugs (10) $10
    9 Pin Aviation Plugs (5) $11
    Northern Tool
    Ironton transfer pump, ironton casters, and two Hobart plasma glasses $135 Shipped
    Amazon
    Vivo Wall Mount for Keyboard/Monitor $109 Shipped
    Digital Energy Yellow Surge Protector $25
    Automationtechnologiesinc - Keling KL-5056E Drivers $132
    CNC4PC - Two c10 Breakout Boards $46
    CNC4PC - 3d printed 60mm Motor Back Cover Kits $68
    Screws for gear rack and rails, usb hub and extension $70
    Automation Overstock
    www.automation-overstock.com/c...
    Two sets of BLH 20mm Linear Guideways 1600mm with 8 square style blocks $675
    Tnutz.com
    Tnutz15 Series gantry and risers 3030 $271
    Two 18” pieces and one 72” piece
    CandCNC
    www.candcnc.com/store-home/fe...
    Feather Touch Ohmic Sensor Kit $112
    Fineline Automation - $668 Shipped
    www.finelineautomation.com/pr...
    Three - 3:1 Gear reduction motor mounts - 3/*' drive pulley
    Three - 54” Precision Gear Rack
    Automation Technologies - $366 Shipped
    www.automationtechnologiesinc...
    45v 13A Toroidal Unregulated Power Supply
    Four Nema 23 570oz 5A 3/8” shaft motors
    Two 6ft Parallel Port Cables MtoF
    Tractor Supply
    Tractor supply bag of 3/8” bolts $10 - for frame assembly
    Tractor Supply bag of 5/16” carriage bolts $8 - for tslot assembly
    Norwesco Horizontal Leg Tank (65 Gallon) $214
    Joe Fazzio Steel Supply
    First Trip - Frame $484
    6” x 1/4” x 10' cold rolled flat bar for carriages (1) (only used 2')
    3” x 1/4” x 10' cold rolled flat bar for mounting pads (1)
    2” x 3” x 1/8” wall 12' for pan support between rails (2)
    5” x 2” x 1/8” wall 10' for Y rails (1)
    3” x 1/8” wall x 12' Square tube for frame and supports (6)
    Second Trip - Water Pan $250
    5'x8' 16ga sheet for pan floor (1)
    .75” 16ga box tubing 10' for leveling bars (2)
    2” angle 1/8” x 10' for slat holders (2)
    3” x 1/8” x 10' Flat bar for pan border (2)
    2” x 1/8” x 10' Flat bar for slats (13)
    Misc Items
    ProCut Laser Crosshairs $60
    Mcmaster 1/2” x 6” leveling feet 6111k255 $62
    Rail Caps for linear guides, Aliexpress $40
    Hypertherm Retrofit Machine Torch Harris Welding $650
    Hypertherm Ohmic Retaining Cap $39
    Fill and drain items from Lowes $75
    2” PVC and ball valve for drain
    3/4” tubing and fittings for fill from tank to pump
    Greencut plasma fluid (Four Bottles) $92 shipped
    www.lubeclean.ca/product/gree...
    DIMENSIONS:
    Y Rails
    5” x 2” rectangular tube - 63”
    X Water Pan Supports
    3” x 2” - 55”, welded 2” tall level with bottom of 5” Y rails
    Front to back 52” overall length, Center two supports evenly spaced.
    Legs & Connecting Plates
    3” x 3” legs 30“ with 1/4” plate top and bottom.
    3” flatbar at top of legs. 5” long. Legs welded on center. 3/8” bolt holes centered half inch in from each end
    3” flatbar on bottom for caster mount. 4” long. Caster centered. Plate welded offset on bottom of 3” tube leg with one set of caster bolts in tube,nuts welded to plate & one set of bolts mounted inbound.
    Side Braces & Tank Mount Bars
    3” x3” side braces welded between the legs are 46”
    3” x 3” water tank supports are 52” long and under-hung below the side supports. 5.75” x 3” x 1/4” end plates are welded flush to the end and bolt holes are drilled 1 1/4” on center from the top for 3/8” mounting bolts.
    Linear Guides & Gear Rack
    Top of linear rail is 1 1/4” from top of 5x2 tube.
    Top of hear rack is 2 1/8” from bottom of linear rail.
    Gantry Height & Z Height
    Bottom of Z axis is 4 3/4” from water pan.
    Bottom of gantry is 8” above water pan.
  • Khoa học và Công nghệKhoa học và Công nghệ

NHẬN XÉT • 0